Telephone Operation
Handset Operation
1.Make a Call
Press before or after dialing number to place a call.
2.Flash/Call Waiting
Press to begin a call, then dial a number. During a call, press to receive an incoming call, if call waiting is activated.
3.Chan
While on a call, press CHAN to switch to a clearer channel.
4.Delete
Press to delete one or all calls in the call log. See page 20 for complete instructions.
5.Answer a Call (any key)
Press any key (except OFF) to answer a call.
6.Handset Volume
Adjust the volume while on a call. A double beep will sound when you reach the maximum or minimum setting.
CID and DIR keys
| 6 | |
1,2 | 7 | |
8 | ||
| ||
| 10 | |
5 |
|
Basic Operation
• When phone is not in use, press /CID to display caller ID | 3,4 | 9 | |
information. | |||
|
|
•When phone is not in use, press 
/DIR to display directory entries.
7.Select
Press to confirm the highlighted option while in programming mode.
8.Off
During a call, press to hang up. While in programming mode, press to cancel an operation, back up, or exit.
9.Redial/Pause
Press to view redial memory. While entering numbers, press and hold to insert a dialing pause.
10.PROG
Press to enter programming mode.
www.vtechphones.com | BASIC OPERATION |
