VTech t2415 manual Basic Operation Batteries, Battery Care and Maintenance

Models: t2415

1 35
Download 35 pages 40.18 Kb
Page 21
Image 21
BATTERY LOW

Basic Operation

Batteries

Battery Care and Maintenance

Maximum talk time on a fully charged battery is approximately 6 hours. Maximum standby time is 7 days.

The Battery needs charging when:

— A new battery is installed in the Handset.

— The phone beeps twice every five seconds.

— The screen displays BATTERY LOW and the low battery icon.

• Place the Handset in its Base so the CHARGING light turns on. The Battery is typically fully charged in 12 hours.

• You can keep the battery fully charged by returning the Handset to its Base after each use.

• If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced. Use only VTech batteries.

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the User’s Manual.

Replacing the Handset Battery

1.Remove the battery compartment cover on the Handset by pressing on the indentation and sliding the cover downward.

2.Lift out the old battery and disconnect.

3.Align the two holes in the new battery’s plug with the socket pins, and snap the plug into place. Place the battery in the compartment with the wires in the

ower right corner, along the bottom of the battery. 4. Replace the cover by sliding it up into place.

5.The new battery must be charged before using the phone. Place the Handset in its Base and allow it to charge for at least 12 hours the first charge. The telephone might operate before that, but for best performance, let the battery charge fully.

20

Page 21
Image 21
VTech t2415 manual Basic Operation Batteries, Battery Care and Maintenance, Replacing the Handset Battery