VTech VM301 user manual Add and pair a baby unit, To pair a baby unit

Getting started

Add and pair a baby unit

Each newly purchased baby unit (VM301) must be paired to the parent unit before use. Make sure you power on the baby unit and the parent unit before pairing.

To pair a baby unit:

1.On the idle parent unit, press MENU/SELECT.

2.Press or to choose PAIR/UNPAIR CAM, then press MENU/SELECT or.

3.Press MENU/SELECT or again to choose Pair new CAM.

4.Press or to choose a desired baby unit slot, then press MENU/SELECT.

5.When the screen displays Please press both [+] and [-] keys on CAM side until POWER indicator flashes Red and Green light, immediately press and hold + and - for 5 seconds on the new baby unit. Thelight on the new baby unit flashes red and green alternately.

6.When pairing is successful, the screen displays the image from the newly paired baby unit. The light on the new baby unit turns red when it is powered by AA batteries or turns green when it is powered by AC power.

•If pairing fails, the screen displays Pairing failed. Try the pairing process again.

•Any new baby unit paired to an occupied baby unit slot will unpair the current unit.

•Only one baby unit can be paired at a time.

12