![](/images/new-backgrounds/1210619/21061921x1.webp)
20401551en_ba_a0
Setting up the telephone
Displays, keys, symbols
Displays
The display gives you information on the current status of your telephone.
The «standby indicator» shown below shows you your handset is ready for use.
The symbols in the upper row of the display have the following meaning:
| R Ó M G S A |
| |
| 888888888888 |
| |
|
|
| |
R | The symbol is permanently lit if a connection to the base station exists. | ||
The symbol flashes to indicate that the handset is near the limit of the | |||
| |||
| base station range. |
Ó | You have pressed the talk key. |
M | You have pressed the “mute” key: the microphone is off. |
G | You have switched off the ring tone. |
ÍYou have activated the key lock.
KShows new entries in the call list*.
AShows the battery charge status. Two segments indicate full or almost full batteries. If no segment is shown or the empty frame is flashing, your handset should be returned to the base station for charging.
Note At the end of a call the duration of the conversation is shown on the display.
*Only in networks that enable caller ID
10