![](/images/new-backgrounds/1295242/29524229x1.webp)
GETTING STARTED
SETTING UP YOUR VTECH VT 1901 Choose an area near an electrical outlet and a telephone wall jack.
AC POWER ADAPTOR
Plug the AC power adaptor into an electrical outlet and the DC connector to the back of the base unit.
TELEPHONE |
WALL JACK |
AC |
OUTLET |
DC 9V TEL LINE |
HANDSET RINGER
The handset ringer is programmed ON as the factory default setting. Refer to PROGRAMMING THE RINGER on page # for more information.
SETTING THE TONE/PULSE SWITCH The TONE/PULSE switch is located on the bottom of the base unit and is factory set to TONE. If you have touch tone service, do not change the switch setting. If you have rotary (Pulse) service, set the switch to PULSE.
PULSE
| TONE PULSE |
TONE | SELECTION |
|
CHARGE THE HANDSET BATTERY PACK BEFORE USE
The battery pack recharges automatically whenever the handset is in the base unit. The battery pack must be charged for 16 hours before using your phone for the first time.
POWER
CHARGING
SPARE BATT
CHARGE THE
HANDSET
BATTERY PACK
FOR 16 HOURSDIGIT
CORDLE
BEFORE USING
CONNECT TELEPHONE LINE CORD Plug one end of the telephone cord into a wall jack, and the other end into the back of the Base Unit.
15
1901MANUAL | 15 | 1/28/99, 3:29 PM |