To select a different ringer type do the following:
1.Press FLASH
2.Press a key 1..4 to select a ringer type
Aconfirmation ring will be heard for the new ringer type.
1.Press FLASH 2,Press a key 1..4
MEMORY DIALING (SPEED DIALING)
The VT 1980 1 VT 1981 can store up to 21 different phone numbers that you can dial simply by pressing MEM and the corresponding location code
SPEED NUMBER DIALING
1.Press ONIOFF to get a dial tone.
2.Press MEM and the memory location number code
For example, to dial the number you assianed to location 18, vou would
p r e s i ONIOFF, MEM, I , ' &
W
2.Press MEM
3.Enter memory location
TO PROGRAMMING SPEED DlAL NUMBERS | EMERGENCY SPEED NUMBER DIALING (EMGCY key) |
The Handset must be OFF.
1.Press MEM. The PHONE LED will blink to indicate that you are in the programming mode.
2.Usingthe dial pad, enter the number you want to store. The number can be up to 16 digits long.
3.Press MEM once more.
4.Press the number of the memory location you wish to store the number in
The EMGCY key is a dedicated speed dial key which is designed to be used for emergency numbers, like 911, or for another frequently dialed number. It is important to note that YOU MUST PROGRAMTHE NUMBER which will be dialed when you press EMGCY. VTECH DOES NOT PRE-
|
| PROGRAM THIS NUMBER. |
|
| To dial using the EMGCY key you can simply press EMGCY on the |
|
| handset .The phone will automatically access dial tone, and dial the number |
| - | you have stored in the EMGCY location. |
TO PROGRAM SPEED | You can also dial the EMGCY number by pressing ONIOFF in | |
DlAL NUMBERS | ||
Press MEM |
| advance,and then press the EMGCY key. |
Enter the number you want to store |
|
|
Press MEM again |
|
|
Enter the memory location |
| TO CHANGE OR REPLACE A SPEED DlAL |
you wish to store- |
| |
|
| NUMBER |
The phone now exits programming mode and emits two beeps.
To change or replace a stored number in speed dial, simply enter the new number and store it in the memory location you wish to change.