VTech VT 2428 manual Telephone Memory, Store a Number or Name in Memory

TELEPHONE MEMORY

This cordless phone can store 10 telephone numbers with names, each up to 16 digits long in memory locations you assign (0-9).

Note: Press OFF at any time to exit memory dial mode.

Store a Number or Name in Memory

1Press PROG/CHAN, then press until the screen displays MEM DIAL.

2Press MEM. The screen displays ENTER 0-9.

3Press the key (0-9) for the memory location where you’re storing this entry. If the selected location is empty, the screen displays ENTER NAME.

Note: If the location is not empty, the current entry is displayed. Press OFF to exit memory dial mode and start again, or follow the instructions to dial, edit or erase the current entry.

4Using the chart below, enter up to 15 characters for the name you’re storing

with the number. Use to backspace and make corrections; use to advance and add a space.

5When you finish entering the name, press SELECT or PROG/CHAN. The screen displays ENTER NUMBER.

6Enter the telephone number. Use to backspace and make a correction.

Press REDIAL/PAUSE to store a pause in the dialing sequence.

7Press SELECT or PROG/CHAN to store your entry. The screen displays DISTINCT RING? and the current setting.

9