VTech VT 2428 manual Table/Desk Installation, Check for dial tone

INSTALLATION

Table/Desk Installation

4.Charge the handset battery.

Place the handset in the base. Charge the battery for at least 12 hours the first time.

5.Check for dial tone.

After the batteries are charged, pick up the handset and press PHONE ; you should hear a dial tone.

6.Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged. If you have dial pulse (rotary) service, you’ll need to change the dial mode.

•Press PROG/CHAN on the handset to enter programming mode.

•Press or until the screen displays DIAL MODE: and the currently selected mode.

•Press SELECT.The current setting blinks.

•Press to select TONE or PULSE .

•Press SELECT, to save the displayed mode.

Wall Installation Using a standard modular Wall Plate

1Connect the T-shaped wall mount bracket to the slots on the underside of the Base Unit. as shown in the illustration.

2Connect the power cord to the Base Unit.

3Connect the telephone line cord to the Base Unit.

4Mount the Base Unit onto the wall plate.

5Follow the steps in Table/Desk installation.

4