ELECTRIC TILTING COUNTER KETTLES
K6ETT, K12ETT, K20ETT ELECTRIC COUNTERTOP KETTLE TROUBLESHOOTING
SYMPTOMS | POSSIBLE CAUSES/REMEDY |
|
|
Kettle not coming | Power switch not turned on/Turn on kettle power switch. |
on, no power light. | Kettle unplugged/Plug kettle in. |
| |
| Breaker tripped or turned off/Reset or turn breaker on. |
| Internal fuse failed/Call authorized servicer. |
| Controls failure/Call authorized servicer. |
|
|
Kettle not heating, | Power switch not turned on/Turn on kettle power switch. |
no heat light | Thermostat not set/Set thermostat to desired level. |
| |
| Kettle is up to set temperature/If higher temperature desired, increase |
| thermostat setting. |
| Kettle not positioned up right/Tilt kettle up till tilt lock latches. |
| Kettle low on water, low water light is on/Fill jacket and vent per |
| procedure in Installtion & Operation manual. |
| Controls failure/Call authorized servicer. |
|
|
Kettle not heating, | Heating element failure/Call authorized servicer. |
heat light is on | Controls failure/Call authorized servicer. |
| |
|
|
Kettle heats up slow | No vacuum in jacket/Refer to venting instructions in Installtion & |
or will not come | Operation manual. |
to boil | Wrong supply voltage for kettle/Check that data plate matches building |
| |
| supply voltage or call authorized servicer. |
| Low voltage to unit/Call authorized servicer. |
|
|
— 10 —
