HEATER INSTALLATION
1.Push one end of the heater into one socket as far as it will go.
2.Swing the other end of heater up until it lines up with the opposite socket.
3.Release heater and it will snap into place.
4.Grasp the heater and move it back and forth to ensure that it is centered correctly.
5.Rotate the heater clockwise, then counterclockwise, to ensure that it is seated correctly.
RACK INSTALLATION
1.Insert the rack by placing the left pivot point just behind the switch slide.
2.Line up the rack evenly and push it straight back until the pivot points can be inserted into the rack pivots.
3.The rack should tilt smoothly and readily.
– 8 –
