Vulcan-Hart ML-126748, ML-126745, ML-126744, ML-126747, VC4EC, C4ED Assembling Stacked Ovens

Models: C4ED VC4EC ML-126747 ML-126744 ML-126745 ML-126748

1 16
Download 16 pages 9.18 Kb
Page 6
Image 6
ASSEMBLING STACKED OVENS

ASSEMBLING STACKED OVENS

Unpack the ovens and the stack kit. Position the oven to be used as the bottom oven on its left side for access to the oven bottom, taking care not to scratch or damage it.

Attach the four leg assemblies with the 24 bolts and lockwashers (six per leg).

Place the lower oven (with legs) on the floor and remove two 7/16" (11 mm) diameter knockouts on each side of the top cover.

Install two locating studs to the bottom of the top oven per stacking kit instructions.

Move the oven with legs to the installed position. Place the upper oven on top of the lower oven using the locating studs.

Remove the optional rear panel, if provided, from the TOP oven. Install the Stacking Flue (Fig. 3) with the four screws provided. Replace the top oven rear panel, if provided.

STACKING FLUE

PL-53463

Fig. 3

– 6 –

Page 6
Image 6
Vulcan-Hart ML-126748, ML-126745, ML-126744, ML-126747, VC4EC, C4ED operation manual Assembling Stacked Ovens