Manuals / Vulcan-Hart / Kitchen Appliance / Hot Beverage Maker

Vulcan-Hart VGL20E, VGL60E, VGL40E operation manual GAS Connection, Testing the GAS Supply Piping

Models: VGL20E VGL60 VGL40E VGL40 VGL20 VGL60E

1 12
Download 12 pages 62.52 Kb
Page 5
Image 5

GAS CONNECTION

The data plate on the lower right side of the kettle indicates the type of gas your unit is equipped to burn. DO NOT connect to any other gas type.

A 1" NPT line is provided at the rear for the connection. Each kettle is equipped with an internal pressure regulator which is set for 4" W.C. manifold pressure for natural gas or 10" W.C. for propane gas. Use the 1/8" pipe tap on the burner manifold for checking pressure.

An adequate gas supply is necessary. Undersized or low pressure lines will restrict the volume of gas required for satisfactory performance. A maximum supply pressure of 8" W.C. for natural gas and 13" W.C. for propane gas is recommended. With all units operating simultaneously, the manifold pressure on all units should not show any appreciable drop. Fluctuations of more than 25% on natural gas, and 10% on propane gas, will create pilot problems and affect burner operating characteristics. Contact your gas company for correct supply line sizes.

Purge the supply line to clean out any dust, dirt, or any foreign matter before connecting the line to the unit.

Caution: The pipe thread compound used when installing pipes must be a type that is resistant to the action of liquified petroleum or propane gases.

Codes require that a gas shut-off valve be installed in the gas line prior to the kettle. Make sure the pipes are clean and free of obstructions, dirt, and piping compound.

TESTING THE GAS SUPPLY PIPING

When test pressures exceed 1/2 psig (3.45 kPa) the steam kettle and its individual shut-off valve must be disconnected from the gas supply piping system during any pressure testing of the system. When test pressures are 1/2 psig (3.45 kPa) or less, the kettle must be isolated from the gas supply piping system by closing its individual shut-off valve during any pressure testing of the system.

WARNING: PRIOR TO START-UP, CHECK ALL JOINTS IN THE GAS SUPPLY LINE FOR LEAKS. USE SOAP AND WATER SOLUTION. DO NOT USE AN OPEN FLAME.

Do not connect the kettle to the electrical supply until after the gas connection has been made.

– 5 –

Page 4 Page 6
Page 5
Image 5
Vulcan-Hart VGL20E, VGL60E, VGL40E operation manual GAS Connection, Testing the GAS Supply Piping
Page 4 Page 6

VGL20E, VGL60, VGL40E, VGL40, VGL20 specifications

Vulcan-Hart, a leader in commercial cooking equipment, offers a range of high-performance griddles designed to meet diverse culinary needs. Among their popular models are the VGL60E, VGL20, VGL40, VGL40E, and VGL60. These gas griddles provide chefs with precision cooking capabilities, reliability, and efficiency, catering to busy kitchens and restaurants.

The Vulcan-Hart VGL60E is a heavyweight in the lineup, featuring a spacious 60-inch cooking surface that provides ample room for preparing multiple dishes simultaneously. It is equipped with a durable stainless steel construction that ensures longevity and is easy to clean. The VGL60E's advanced thermostat technology allows for precise temperature control, ensuring even heat distribution across the griddle's surface. This model is particularly favored for high-volume cooking operations, allowing chefs to cook everything from pancakes to burgers with outstanding efficiency.

For those requiring a more compact solution, the Vulcan-Hart VGL20 is a powerful option with a 20-inch cooking surface. Despite its smaller size, it is equipped with the same high-quality stainless steel construction and robust performance features that characterize the entire Vulcan lineup. Ideal for food trucks or smaller kitchens, the VGL20 strikes the balance between functionality and space-saving design.

The VGL40 and VGL40E models offer a middle ground with a 40-inch cooking area. The VGL40 is designed for traditional gas operation, while the VGL40E introduces electric-powered technology for those looking to minimize gas usage. Both models retain the signature Vulcan capabilities, including built-in grease gutters for easy cleanup and adjustable legs for convenience and stability.

The VGL60 shares features with the VGL60E but comes in a non-electric configuration, catering to kitchens where gas is preferred. All models prioritize user-friendliness and efficiency, including easy-to-access control knobs and quick ignition systems, making them efficient to operate during busy service hours.

In summary, the Vulcan-Hart VGL series, encompassing VGL60E, VGL20, VGL40, VGL40E, and VGL60, showcases a range of griddles designed for today’s demanding culinary environments. They combine advanced technologies, practical features, and robust construction, ensuring reliability and performance that chefs can depend on in their day-to-day operations. Whether for a high-volume restaurant or a smaller food establishment, there's a Vulcan-Hart griddle designed to meet the specific needs of any kitchen.