5
6
4
3
3.Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
1.Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords may create a risk of fire.
2.A battery operated tool with integral batteries or a separate pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
3.Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire.
PERSONAL SAFETY
1. Stay alert, watch what you | are doing and use common sense when |
operating a power tool. Do not use tool while tired or under the influence of | |
drugs, alcohol or medication. | A moment of inattention while operating |
2
power tools may result in serious personal injury. |
GENERAL SAFETY RULES
WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire or serious personal injury.
SAVE ALL INSTRUCTIONS!
WORK AREA
1.Keep your work area clean and well organized. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmosphere, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks 5
which may ignite the dust or fumes.
2. | Dress properly. Do not wear loose clothing or jewelry. Contain long hair. |
| Keep your hair, clothing and gloves away from moving parts. Wear |
| protective goggles when operating the machine. It is recommended to wear |
| protective goggles, gloves, sturdy |
3. | Avoid accidental starting. Be sure switch is in OFF position before |
| installing battery pack. Carrying tools with your finger on the switch or |
| installing a battery pack when the switch is ON invites accidents. Do not |
| install the battery pack before carrying out any work on the machine. |
4. | Remove adjusting wrench before turning the tool on. A wrench or a key that |
| is left attached to a rotating part of the tool may result in personal injury. |
5. | Do not overreach. Keep proper footing and balance at all times. Proper |
| footing and balance enables better6 control of the tool in unexpected |
