INPUT
The Wadia 301 CD can be configured with four optional digital inputs (See section on Optional Inputs). Each time the INPUT key is pressed, the next input is selected. For example, if you are listening to the internal CD drive, and you press the INPUT, Input 1 will be selected. Press it again, and Input 2 will be selected and so on. After Input 4, the list will begin again with the internal CD drive.
INVERT
Pressing the INVERT key on the remote control will cause the Wadia 301 CD to invert phase; pressing it again will switch the phase back to normal. When the phase is inverted, the INVERT indicator on the front panel will illuminate.
REPEAT
Pressing this button once will cause the current track to repeat continuously. Pressing the REPEAT key a second time will repeat the entire disc or program continuously. Pressing it a third time will stop repeating. The repeat mode is indicated by the front panel display.
PROGRAM
The PROGRAM key can be used to create a program to play tracks on a disc in any order you choose. Follow these steps to create a program:
1.While the unit is stopped, use the SKIP keys to select the first track in the program.
2.Press the PROGRAM key to enter that track into the program
3.Repeat until all desired tracks are entered.
4.Press PLAY to hear the tracks in the program order
5.Opening the disc loading drawer or turning the power off will erase the program.
Direct Access Keypad
Use the direct access keypad to move directly to any track on the disc. For track numbers greater than 10, use the >10 key to set the first digit and then one of the number keys for the second digit.
20
