Wadia Digital 860

WADIA 860 COMPACT DISC PLAYER

REMOTE CONTROL OPERATION (continued)

INDEX: Pressing these buttons allows access to the previous or next index

point within a track that has such indexed sections.

TRACK FORWARD/REV: Pressing these buttons allows access to the

previous or next track on a disc.

SEARCH: Pressing these buttons allows fast reverse or fast forward access

through a track.

STOP: Pressing this button while a Compact Disc is playing stops

PLAY

PAUSE: Pressing this button, while a Compact Disc is playing, suspends

PLAY.

Pressing the PLAY button will resume play at the point where the

pause button was pressed.

PLAY: After a Compact Disc has been loaded into the drawer, pressing

this button plays the disc beginning with the first track on the disc or in

a sequenced program. Pressing this button while the drawer is open,

closes the drawer and begins play with the first track on the disc or in a

sequenced program.

PROGRAMMING THE CD TRANSPORT

Program: Pressing this button enters all tracks subsequently chosen with

the numeric keys (up to a total of 20 selections) as part of a programmed

sequence.

Programming a sequence of tracks can be done either in the stop mode or

in the play mode.

To program a sequence of tracks from a compact disc while in the stop

mode, first press the program button. The program indicator will illuminate in

the display window. Next, press the numeric buttons of the tracks you would

like to program in the sequence desired. The number of each selected track

will be indicated under the track indicator, the location of that track within the

program (the playing order) of the tracks selected will be indicated in the

area where index is usually identified, and the total program playback time

of the sequence will be updated as each track is programmed.

To program a sequence of tracks from a compact disc while in the play

mode, the procedure is the same. The only difference is that the total

program’s playback time will not be displayed.

A program will continue to be held in memory, even after that

program has been completely played.

When programmed playback is ended by pressing the stop button, the

program will continue to be held in memory. However, if the stop button is

pressed a second time, the program indicator on the display will go out

and the programmed contents will be erased from memory.