18
Operation Commands
Shown below is a table of all the controls on the front panel and the
remote to operate your Wadia 301 CD. Refer to the page number
noted for more information about each command.
Command Icon Description Control Location Page
Open/Close Open or close loading
drawer Front panel and remote 18
Play To begin playing disc Front panel and remote 18
Stop Stop playing Front panel and remote 18
Pause Pause playing Front panel and remote 18
Skip forward Move to next track Front panel and remote 19
Skip back Move to beginning of
current track Front panel and remote 19
Skip back
(repeated) Move to beginning of
previous tracks Front panel and remote 19
Volume
Up/Down
Increase or decrease
playback level Front panel and remote 19
Mute Mute output Remote only 19
Input Select internal CD transport
or external digital inputs Remote only 20
Invert Invert output 180ยบ Remote only 20
Repeat
Repeat tracks, disc or
program Remote only 20
1-10 (key pad) Select tracks or program Remote only 20
>10 Select tracks with track
numbers greater than ten. Remote only 20
Program Used to create program Remote only 20
OPEN/CLOSE
Pressing the OPEN/CLOSE key causes the disc-loading drawer to either
open or close. You can also close the drawer by gently pushing on the
drawer front, or by pressing PLAY or SKIP FORWARD.
PLAY
Pressing PLAY causes the unit to begin playing. If the drawer is open,
pressing PLAY will close the drawer before playing begins.
STOP
Pressing STOP causes the disc to stop playing.
PAUSE
Pressing PAUSE suspends playing until play is pressed, or until pause is
pressed again. Playing will resume at the same point on the CD where
the pause button was pressed.