Wagan Inverter user manual Heat Dispersal, Specification, Name, Description

Slim Line 1750 Watt Power Inverter by Wagan Tech

USER’S MANUAL — Please read before using this equipment.

_______________________________________________________________________________________________________________________

HEAT DISPERSAL

The inverter generates heat while it is working. This is not a malfunction. However, if the inverter gets too hot while working, it will turn off by itself.

Position the inverter where air flows freely around it to allow the heat to disperse.

The inverter’s thermal protection prevents it from operating when its temperature exceeds 130 ± 10 θF / 55

± 5 θC.

SPECIFICATION

Name	Description
Input	12V (10-15V) DC
Output	1750V AC
Output frequency	60 Hz
Output waveform	Modified sinewave,phase corrected
Continuous power	1750 Watt
Surge power	3500 Watt
Efficiency	Approx. 85-90 %
No load current	< 0.3 A
Battery low alarm	10.5 ± 0.5 V DC
Battery low shutdown	10 ± 0.5 V DC
Alarm and thermal	130 ± 10 θF / 55 ± 5 θC
shutdown
Internal DC fuse	30 A
External DC fuse	None
AC output socket	2 outlets of 3-prong
Power switch	DC input ON/OFF control
Dimensions (LxWxH)	15x8x3.3 in³
Net Weight	10 lb

NOTE

All specifications are typical at nominal line, half load, and 77 θF / 25 θC unless otherwise noted. Specifications are subject to change without notice.

© 2003 Wagan Corporation. 5

All Rights Reserved.

Wagan and Wagan.com are trademarks used by Wagan Corporation.

www.wagan.com

Printed in China