Before you begin - This section contains instructions that will be repeated throughout this manual.
Locking the Spray Gun:
WARNING Always lock the trigger off when attaching the spray tip or when the spray gun is not in use.
Model GX-05 and GX-07 Spray Gun
The gun is locked when the trigger lock is at a 90º angle (perpendicular to the trigger in either direction).
GX-05 GX-07
Model
To lock the gun, turn the trigger lock forward and slightly down until it stops.
Plugging in the Sprayer:
1.Check that the ON/OFF switch is in the OFF (O) position.
O 
2.Plug the power cord into a grounded outlet or heavy duty grounded extension cord. Plug in the extension cord. Refer to Important Electrical Information, page 3.
Pressure Relief Procedure:
WARNING | Be sure to follow the Pressure Relief Procedure when shutting the unit off FOR ANY PURPOSE. |
This procedure is used to relieve pressure from the spray hose. |
1.Lock the spray gun off (see directions above). Move the ON/OFF switch to the OFF position.
O
2.Turn the PRIME/SPRAY knob to
PRIME.
SPRAY | PRIME |
3.Unlock the spray gun and trigger spray gun into the side of the material bucket. Lock the spray gun.
7 | English |
|
|
