Maintenance Instructions

ADJUSTMENTS

Blade Clutch

Idler Pulley

Stop Block

 

1/8 in.

 

 

 

 

(3 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PTO Belt Tightener

Chassis

Blade Brake Band Adjustment

NOTE: The length of the actuator rod is adjusted by disconnecting the bottom clevis and shortening or lengthening accordingly. The standard pre-set length of the actuator rod is set at the factory at 8-1/4 in. (209 mm).

8-1/4 in.

Locknuts

(209 mm)

Bottom

Clevis

Brake Actuator Rod Adjustment

2.After adjustments are complete, check blade brake action as described in CHECKING/SER- VICING the Blade Brake Action in this section. If blades do not stop within five (5) seconds, check the following:

a.Recheck 1/8 in. (3 mm) gap between stop block and chassis.

b.Make sure clutch and brake linkage are working freely (no binding).

c.Check the brake band lining.

d.Check the brake drum on the pulley. If excessive wear is present, it will be neces- sary to replace worn parts.

Transmission Control

IMPORTANT: The proper adjustment of the trans- mission control stops is essential for efficient oper- ation and life of the transmission. These stops are properly adjusted at the factory and should only re- quire readjustment if the transmission or related control linkage is removed or changed.

NOTE: It would not be unusual for a new machine, after initial 5 or 10 hours of operation, to begin to not travel straight (this is due to the break-in of the transmissions). In this case, proceed to Straight Ground Travel Adjustment - Step 4.

IMPORTANT: The following adjustment proce- dures are sequential. Check and adjust each func- tion in the order given.

Set Forward Travel Limit (Stop) - Step 1

1.Move the Forward Speed Control (FSC) lever to the most FORWARD position.

2.Check clearance of the RH and LH steering le- ver actuator arms with the frame and adjust for- ward stop bolt so each lever clears the frame by at least 1/16 in. (1.6 mm). Clearance of the arm to the frame should be checked while ap- plying pressure back on the arm to remove any slack in the linkage.

77

Page 81
Image 81
Walker MT owner manual Brake Actuator Rod Adjustment, Set Forward Travel Limit Stop Step

MT specifications

Walker, Montana, is a quaint and picturesque town nestled in the heart of the Treasure State. With a population of just under 2,000 residents, it possesses a unique charm that combines the beauty of nature with a tight-knit community atmosphere. The surrounding landscape boasts rolling hills and expansive fields, providing a stunning backdrop for outdoor enthusiasts seeking adventure or tranquility.

One of the main features of Walker is its commitment to sustainability and environmental conservation. The community is known for its efforts in promoting green technologies and practices. Many residents engage in eco-friendly farming, utilizing organic methods to cultivate the land and promote biodiversity. The town also actively participates in recycling programs and initiatives aimed at reducing waste, making it a great model for small-town sustainability.

Walker is a hub for modern technologies, with a focus on connecting residents to the digital world while preserving its historic roots. High-speed internet has become increasingly accessible, allowing local businesses to thrive and residents to enjoy the benefits of online connectivity. This digital shift has enabled the emergence of remote work opportunities and e-commerce, which has been pivotal for the local economy.

The town's infrastructure includes well-maintained roads and public transport options, ensuring ease of access for both residents and visitors. The local government has invested in smart city technologies, such as intelligent traffic management systems and energy-efficient street lighting, enhancing safety and improving quality of life.

Culturally, Walker celebrates its heritage through various events and festivals throughout the year. The annual Walker Fair showcases local artisans, musicians, and food vendors, creating a lively atmosphere that fosters community spirit. Education is also a priority, with schools emphasizing technological literacy and environmental awareness, preparing the next generation to thrive in a rapidly changing world.

Walker, Montana, stands out as a model small town that seamlessly blends nature, innovation, and community engagement. With its focus on sustainability, modern technologies, and rich cultural heritage, Walker offers a unique lifestyle that appeals to residents and visitors alike. Whether one seeks adventure in the great outdoors or the comforts of a close-knit community, Walker truly embodies the essence of Montana living.