Walker W1100 manual Walker Clarityfeatures, Ringer Controls Visual Ringer, Warble Control

WALKER CLARITY®FEATURES

➤ Ringer Controls ➤ Visual Ringer

E N G L

The Walker Clarity comes with a Special Low-Frequency Ringer designed to be easily heard by everyone.

The ringer also comes with a volume, pitch and warble control, allowing it to be tai- lored to each user.

The ringer Volume Control has three settings: OFF, LOW, and HIGH. It is suggested that you set the volume control to high when you first start using your Walker Clarity. To do this, slide the ringer volume control toward the largest dot.

The ringer also has a Pitch Control that has three settings: LOW, MED, and HIGH. The low frequency is typically the easiest for people with partial hearing loss to hear. It is suggested that you set the pitch control to low (the smallest dot) when you start using the phone.

A lighted ringer works in conjunction with the low frequency ringer. It sends out a visual flashing alert every time a phone call is coming in. (This ringer will light up regardless of the setting on the ringer volume control.)

➤Warble Control

The warble rate, or speed of ring can be also be varied from Fast/Medium/Slow when AC power pack is installed.

Warble

I

S

H

For Low Frequency,

Loud Ring

VolumePitch

Look On Right

Edge of Case

➤Tone/Pulse Selection

The Clarity Phone can be used as either a TONE (touch dial) or PULSE (rotary dial) phone. Tone dialing is required for using special phone services such as long distance calling. Please check with your local phone company on certain types

of service.

13