Walker W1100 manual To Set the TONE/PULSE Switch, To Operate Last Number Redial, Flash

Models: W1100

1 27
Download 27 pages 44.22 Kb
Page 14
Image 14

WALKER CLARITY® FEATURES

Note for Users with Pulse/Rotary ser- vice only: Many automated answering systems used by banks, stores and gov- ernment agencies ask you to “Push 1 for service”, “Push 2 for the operator”, etc. You must switch the tone/pulse switch on the top edge of the phone to tone before responding to these prompts. In summary, dial the phone number you want to call in pulse mode, switch to tone mode to interact with the automated answering system, switch back to pulse mode when your call is done. When switching from Pulse to Tone during a call, there will be a 3 second delay from the time you first push a key in tone mode until the key press is transmitted. You cannot switch from tone to pulse during a call.

Important: You must have tone signaling service to use the TONE feature on the Walker Clarity. If in doubt, contact your local telephone company.

To Set the TONE/PULSE Switch:

1.Move the switch towards the correct setting.

2.Depress the hookswitch once.

3.The phone will now dial in the mode you selected.

Last Number Redial

Last Number Redial allows you to auto- matically redial the last telephone number

you called. This feature is convenient for redialing numbers which are busy. The phone number stored for redial will be reset with every new call you make.

To Operate Last Number Redial:

1.Depress the hookswitch to get a new dial tone.

2.Press the “Redial” Button once.

3.Stay on the line, and your call will be dialed.

The last number dialed will be stored in the Walker Clarity for you until you dial another number or disconnect the tele- phone from the wall jack.

Flash

Flash is a special feature that is required to use some calling services provided by your local phone company, such as call waiting. Consult your guide to these services which is available from your local phone company. Flash serves the same purpose as pressing and releasing the hook switch very quickly.

To Use the Flash Feature:

Simply press the Flash button at the appropriate time as outlined in the guide provided by your local phone company.

14

W-1100 Clarity Extra

Page 14
Image 14
Walker W1100 manual To Set the TONE/PULSE Switch, To Operate Last Number Redial, To Use the Flash Feature