IMPORTANT UNPACKING INSTRUCTIONS
Remove your new Waring Pro® Juice Extractor from the box. With the unit facing you, unlock cover by turning cover clockwise.
•Remove cover and take out any packaging material used to protect the shredder disc (Part #3).
•Lift and remove strainer basket (Part #3).
•Unlock and remove pulp collector (Part #4) by turning it clockwise, then remove.
ASSEMBLY
•Fit the pulp collector bowl (4) on top of the motor housing (5) and lock into place.
•Place strainer basket with shredder disk (3) inside pulp collector (4) over drive coupling.
•Place cover and feed tube (2) over pulp collector bowl
(4) with the nose just left of the juice spout.
•Lock cover and feed tube (2) by twisting counterclockwise until it snaps shut and the nose lines up with the juice spout.
PARTS
1.Pusher
2.Feed tube and cover
3.Strainer basket with shredder disk
4.Pulp collector with juice spout
5.Motor housing
6.Power switch
7.32 oz. Stainless steel juice collector cup
8.Cleaning brush for strainer basket
1.3.
2.
4.
5.
6.
7.
8.
3
