Waring manual Grounding Instructions, MX1000R Model MXMPBKP6 OPERATION

GROUNDING INSTRUCTIONS

•For your protection, this appliance is equipped with a 3-conductor cord set.

•120 volt units are supplied with a molded 3-prong grounding-type plug (NEMA 5-15P) and should be used in combination with a properly connected grounding-type outlet as shown in Figure 1.

If a grounding-type outlet is not available, an adapter, shown in Figure 2, may be utilized to enable a 2-slot wall outlet to be used with a 3-prong plug, except in Canada and Europe. Referring to Figure 3, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate.

Caution: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician.

Never use an adapter unless you are sure it is properly grounded. Note: Use of an adapter is not permitted in Canada and Europe.

Green/Yellow: Earth Ground. Blue: Neutral. Brown: Live.

Note: User installed cord set plugs are not permitted in Europe.

MX1000R (Model: MXMPBKP6) OPERATION

1.Before starting, make sure that the blender is unplugged.

2.With the unit in OFF position, place container on blender base. Be sure container is fully seated and that drive coupling is properly engaged. Plug blender cord into outlet.

3.Put ingredients into container and cover it with

container lid. Do not fill above MAX line.

4. This blender has 2 speed settings: HI and LOW. Press Paddle Switch to desired position. To crush ice quickly, use HI speed setting.

5.When finished blending, set paddle switch to OFF position.

6.This blender is equipped with a PULSE option. Hold paddle switch in down position to engage PULSE function. Unit will run on HI speed until the paddle switch is released.