Waring WC1000 manual Making Coffee - Important Steps To Follow

3.Plug unit into electrical outlet. Flip the power switch to On position and allow unit to heat until the ready light (green) is lit – approximately 13 minutes.

Note: This coffeemaker has an initial heat-up time of 13 min- utes. The coffeemaker is designed to remain in the On position except for extended leave or vacation from your home. Every time the coffeemaker is turned to the Off position, it will require a 13-minute heat-up time prior to its next use.

4.If more water is needed, the add water indicator light (blue) will be lit. If this is the case, slowly pour water to the fill area until the add water indicator goes out, indicating that the water reservoir tank is now filled. Or, add water as indicated in glass indicator window until blue light

goes out.

5.Make sure the ready indicator light (green) is lit. If it is not lit, wait until it is, to ensure that the water has heated to the proper temperature, approximately 200°F.

MAKING COFFEE –

IMPORTANT STEPS TO FOLLOW

Before making the first pot of coffee in your new Waring Pro™ Coffeemaker, we recommend operating the coffeemaker twice using only water. Do not use paper filter or coffee grounds. This will remove any dust or residue in the system.

1.Place an empty glass carafe in its position on the lower warming plate.

2.Check to see if the add water indicator light is lit. If it is, slowly pour water to the fill area until the add water indicator light goes out. Or, add water as indicated

in the glass indicator window until add water indicator light goes out.

3.Ready indicator light should be lit, indicating that the water has reached the proper brewing temperature. Note: The ready indicator will not light if the add water indicator is on.

4.Place an empty carafe on the lower warming plate.

9