REAR PANEL CONTROLS
FUSE: | 115 V ~ 15 A |
| 230 V~ 8 A |
MAINS IN AC | AC Terminal with integrated fuse compartment for connection to the mains power supply. |
GROUND LIFT | Switch isolates the earth connection from the ground of signal. Should several devices be simultane- |
| ously connected to earth by the same conductor as well as via line connections, a so called hum loop |
| might appear. In this case operate GROUND LIFT to eliminate the current hum (when pressed). |
FOOTSWITCH | Socket to connect a double latch footswitch with a stereo jack. The tip switches Boost on/off, the |
| ring switches the EQ on/off. |
TUNER OUT | Socket for a tuning device. The pure bass signal is available at this socket when the amp is switched |
| MUTE. |
LINE OUT | Output for connection to an external power stage (post MASTER) |
EFF. SEND & | Sockets to implement the effects loop. Connects the input of the effects to the SEND socket and its |
EFF. RETURN | output to the RETURN socket. |
EFFECT MIX | control determine the degree to which the effects within the parallel loop affect the signal. |
DI PRE/POST | When this switch is depressed, the signal at the DI OUT socket is the pure bass signal (PRE). |
| Otherwise it is the signal after the tone controls and any connected effects devices have done their |
| work (POST) |
DI OUT | Balanced output for the connection to a mixing desk (PA or Studio). |
SPEAKER OUT | Lockable Coaxial Speaker Connection and 1/4" jack socket (only |
