Wasp Bar Code WLR8900 manual Autosense Stand Mode, Factory Default & Keyboard Connection

Chapter 5

Factory Default & Keyboard Connection

Factory Default

Use the Factory Default bar code to reset the scanner to the Default settings.

Factory Default

Autosense Stand Mode

Scan this Autosense Stand Mode bar code to enable the hands-free autosense feature of the WLR 8900/8905 Scanners. If you desire to turn this mode “off,” please scan the default bar code above.

Autosense Flash Mode

Enable

Keyboard Connection

The Keyboard Connection is used to program the Wasp WLR 8900/8905 Scanners for the type of computer it is attached.

PC - AT (PS/2) * PC - XT

Notebook

*Default

6