WatchGuard Technologies XTM 5 Series manual Applicable Documents Revision History

Design for Manufacturing and Environment Document

3.22– Push tabs on the inside of the bezel to disengage from the chassis. Remove the bezel. A flat-head screwdriver can be useful in this step.

Material removed (P/N & material type)

Bezel

230-3820-001 – bezel, red, glossy; 1 ea.

Chassis bottom212-3817-001 – bottom,

chassis, red; 1 ea

Instruction visual

Push tabs

Push tabs

4.0Applicable Documents

5.0Revision History

REV.	REV. DATE	REVISED SECTION	REASON	ECO#
NO.
A	6/10/10	New document	Initial Release	1790

WatchGuard Technologies.Doc #480-2535-001 Rev. A Page 21 of 21 Authorization and Revision History for this document is available in the WatchGuard ECO system