High Shelf Atten
Range
0 to 11 (18dB attenuation, 0.1 steps)
Default
0
High Shelf Frequency (Atten Sel)
Range
5kHz, 10kHz, 20kHz
Default 20kHz
In turns the EQ on/off but leaves the analog modeling.
Range
On/Off
Default
On
Mains controls analog characteristics caused by noise floor and hum, based on the power supplies of the original units.
Range
Off, 50Hz, 60Hz
Default
60 Hz
Gain controls the trim level.
Range
Default
0dB
Meter displays output level in dBFS. The LED located in the upper right corner lights up when output signal is clipping.
Waves PuigTec
11
