Wayne-Dalton 9100 installation instructions Slide Lock Installation

(2)1/4-20 X 7/8” SELF-

DRILLING SCREWS

STRAP

BRACKET

STRAP

J-STRUT FIG. 9

	(2) 1/4-20 X 7/8” SELF-
	DRILLING SCREWS
	STRAP BRACKET
J-STRUT	(WITHOUT STRAPS)
	FIG. 11

WINDLOAD

POST

J-STRUT

(2) 1/4-20 X 11/16” SELF-

DRILLING SCREWS

STRAP

BRACKET

STRAP

FIG. 10

Slide Lock Installation

Install slide lock on the second section of the door. Secure the lock to the section with (4) 1/4-20 x 11/16” self drilling screws. Square lock assembly with door section and hole in vertical track. The slide lock should be spaced approximately 1/8” from the section edge.

IMPORTANT! SLIDE LOCKS AND OPERATORS SHOULD NOT BE ENGAGED AT THE SAME TIME. IF AN OPERATOR IS INSTALLED ON THE DOOR AND ENGAGED, BE SURE SLIDE LOCKS ARE DISENGAGED.

ONLY USE SLIDE LOCKS WHEN OPERATOR IS DISENGAGED FROM THE GARAGE DOOR.

ALIGN WITH

HOLE IN1/8”SLIDE LOCK VERTICAL

TRACK

(4) 1/4-20 X 11/16”

SELF DRILLING SCREWS

FIG. 12

6