Effluent
Pump
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Operating Instructions | Model EFL30 |
|
|
Description
This pump is intended for use in domestic sump or effluent lift stations. It is suitable for pumping effluent, wastewater, ground water and other nonexplosive, noncorrosive liquids with up to 3/4” solids. The pump includes a wide angle float switch that turns the pump on and off as the fluid level rises and falls.
Effluent pump will not pump raw
sewage or any substance exceeding 3/4” size.
Safety Guidelines
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
Danger indicates an imminently
hazardous situation which, if not avoided, will result in death or serious injury.
Warning indicates a potentially
hazardous situation which, if not avoided, could result in death or serious injury.
Caution indicates a potentially
hazardous situation which, if not avoided, MAY result in minor or moderate injury.
Notice indicates important
information, that if not followed, may cause damage to equipment.
General Safety Information
1.Know the pump application, limitations, and potential hazards.
Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in flammable and/or explosive atmospheres. Use pump only with liquids compatible with pump component materials. Failure to follow this warning can result in personal injury and/or property damage.
2.Make certain that the power source (electric motor) conforms to the requirements of the equipment.
Disconnect power before servicing. If the power dis- connect is out of sight, lock in the open position and tag it to prevent unexpected application of power. Failure to do so could result in fatal electrical shock!
3.Release all pressure within the system before servicing any component.
4.Drain all liquids from the system before servicing.
5.Secure the discharge line before starting the pump. An unsecured discharge line will whip, possibly causing personal injury and/or property damage.
6.Check hoses for weak and worn condition before each use, making certain that all connections are secure.
7.Periodically inspect the pump and system components. Perform routine maintenance as required (See Maintenance Section).
8.Provide a means of pressure relief for pumps whose discharge line can be shut- off or obstructed.
9.Personal Safety:
a.Wear safety glasses at all times when working with pumps.
b.Keep work area clean, uncluttered and properly lighted; replace all unused tools and equipment.
c.Keep visitors a safe distance from the work area. Make workshop child- proof with padlocks, master switches, and by removing starter keys.
10.When wiring an electrically driven pump such as this, follow all electrical and safety codes, as well as the most recent National Electrical Code (NEC) and the Occupation- al Safety and Health Act (OSHA).
Risk of electric shock! Never connect the green (or green and yellow) wire to a live terminal!
11.This equipment is only for use on 120 volt
Specifications
Power supply requirements | 115V, 60 hz |
Circuit requirements | 15 amps (min) |
Motor duty | Intermittent |
Motor | 115V, 1 Phase, 1725 RPM |
Horsepower | 1/3 |
Motor full load | 5 amps |
Liquid temperature range | 40°F to 120°F |
Max. operating position | 45o from vertical |
Dimensions | |
Intake | 3/4” |
Discharge | 2” NPT female |
Differential | |
Switch | 90o wide angle mechanical |
| tether switch |
Power cord | 18 gauge 3 conductor w/plug |
Construction
Motor body material | .......................Cast Iron |
Motor housing | Cast Iron |
Volute | Cast Iron |
Impeller | Glass reinforced PBT |
Performance
GALLONS PER HOUR AT TOTAL HEAD IN FEET
Model | 10 | 15 | 20 |
EFL30 | 2900 | 2280 | 1380 |
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2004 | For parts, product & service information |
visit www.waynepumps.com
