SONANCE CINEMA® SERIES
Remove Screws |
Rotate Panel and |
Replace Screws |
FIGURE 7: ROTATING THE MIDRANGE/TWEETER PANEL |
6.The new micro flange grille is held in place by several small, powerful magnets on the speaker frame. Place the grille against the speaker and the magnets will hold it firmly in place. When properly installed, the grille flange should make contact with the wall all the way around the speaker.
Painting the Speakers and Grilles
Please refer to the included Painting Instructions sheet.
Specifications
LCR1
Tweeter: | 1" (25mm) silk dome, |
Midrange: | 4” (100mm) carbon fiber/Rohacell® |
| laminated cone with a rubber |
| surround |
Woofer: | Two 5¼" (133mm) carbon fiber/ |
| Rohacell® laminated cones with |
| rubber surrounds |
Frequency Response: | 70Hz – 20kHz ±3dB |
Impedance: | 6 ohms nominal; 4 ohms minimum |
Power Handling: | 5 watts minimum; 150 watts maximum |
Sensitivity: | 90dB SPL (2.83V/1 meter) |
Grille Material: | Perforated steel |
Dimensions (W x H x D): | 8 7/8" x 21¾" x 3 7/8" |
| (225mm x 553mm x 98mm) |
Cutout Dimensions (W x H): | 7 ½" x 20½" (191mm x 521mm) |
Shipping Weight: | 19 lbs (8.6kg) each |
Specifications (continued)
SUR1
Tweeter: | Two 1" (25mm) silk domes, ferrofluid- |
| cooled |
Midrange: | Two 3” (76mm) carbon fiber/ |
| Rohacell® laminated cones with |
| rubber surrounds |
Woofer: | Two 5¼" (133mm) carbon fiber/ |
| Rohacell® laminated cones with |
| rubber surrounds |
Frequency Response: | 70Hz – 20kHz ±3dB |
Impedance: | 6 ohms nominal; 4 ohms minimum |
Power Handling: | 5 watts minimum; 150 watts maximum |
Sensitivity: | 90dB SPL (2.83V/1 meter) |
Grille Material: | Perforated steel |
Dimensions (W x H x D): | 8 7/8" x 21¾" x 3 7/8" |
| (225mm x 553mm x 98mm) |
Cutout Dimensions (W x H): | 7 ½" x 20½" (191mm x 521mm) |
Shipping Weight: | 19 lbs (8.6kg) each |
LCR2
Tweeter: | 1" (25mm) silk dome, |
Midrange: | 4” (100mm) carbon fiber/Rohacell® |
| laminated cone with a rubber |
| surround |
Woofer: | Four 5¼" (133mm) carbon fiber/ |
| Rohacell® laminated cones with |
| rubber surrounds |
Frequency Response: | 70Hz – 20kHz ±3dB |
Impedance: | 6 ohms nominal; 4 ohms minimum |
Power Handling: | 5 watts minimum; 200 watts maximum |
Sensitivity: | 92dB SPL (2.83V/1 meter) |
Grille Material: | Perforated steel |
Dimensions (W x H x D): | 8 7/8" x 34 7/8" x 3 7/8" |
| (225mm x 886mm x 98mm) |
Cutout Dimensions (W x H): | 7 ½" x 33 ½" (191mm x 851mm) |
Shipping Weight: | 29 lbs (13.2kg) each |
SUR2
Tweeter: | Two 1" (25mm) silk domes, ferrofluid- |
| cooled |
Midrange: | Two 3” (76mm) carbon fiber/ |
| Rohacell® laminated cones with |
| rubber surrounds |
Woofer: | Four 5¼" (133mm) carbon fiber/ |
| Rohacell® laminated cones with |
| rubber surrounds |
Frequency Response: | 70Hz – 20kHz ±3dB |
Impedance: | 6 ohms nominal; 4 ohms minimum |
Power Handling: | 5 watts minimum; 200 watts maximum |
Sensitivity: | 92dB SPL (2.83V/1 meter) |
Grille Material: | Perforated steel |
Dimensions (W x H x D): | 8 7/8" x 34 7/8" x 3 7/8" |
| (225mm x 886mm x 98mm) |
Cutout Dimensions (W x H): | 7 ½" x 33 ½" (191mm x 851mm) |
Shipping Weight: | 29 lbs (13.2kg) each |
3
