Wayne 352001-001 warranty Description, Unpacking, Safety Guidelines, General Safety Information

Models: 352001-001 RUP160

1 4
Download 4 pages 57.53 Kb
Page 1
Image 1
Operating Instructions & Parts Manual

Operating Instructions & Parts Manual

RUP160

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Submersible

Utility Pump

Description

This portable, submersible utility pump is designed for non- automatic use in water. The units are equipped with a 9 ft. 3-prong grounding type power cord. The discharge fitting is designed for convenient attachment to a garden hose.

Unpacking

Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, return the unit to the place of purchase for replacement. Failure to do so could result in serious injury or death.

Read & Follow All Instructions

Save These Instructions

Do Not Discard

Safety Guidelines

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates an imminently

hazardous situation which, if not avoided, WILL result in death or serious injury.

Warning indicates a potentially

hazardous situation which, if not avoided, COULD result in death or serious injury.

Caution indicates a potentially

hazardous situation which, if not avoided, MAY result in minor or moderate injury.

Notice indicates important

information, that if not followed, may cause damage to equipment.

NOTE: Information that requires special attention.

General Safety Information

California Proposition 65

This product or

its power cord may contain chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

General Safety

Read all manuals included

with this product

 

 

carefully. Be thoroughly

MANUAL

familiar with the controls

 

 

and the proper use of the equipment. Follow all instructions.

Only persons well acquainted with these rules of safe operation should be allowed to use the unit.

Do not pump

flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not

use in a flammable and/or explosive environment. Pump only clear water. Personal injury and/or property damage will result.

Risk of electric

shock! This pump has not been tested for use in swimming pool or marine

areas. Never place pump in pools while people are in the water.

Do not handle

pump with wet hands or when standing in water or on

a damp surface.

Risk of electric

shock! This pump is supplied with a grounding conductor and grounding type attachment

plug. Use a grounded (GFCI) receptacle to reduce the risk of fatal electrical shock.

1. Wear safety glasses at all times when working with pumps.

2.It is required that this unit be plugged into a Ground Fault Circuit Interrupter (GFCI). Consult a local electrician for installation and availability.

3.Do not use the power cord or discharge hose to carry or handle the pump. Damage to the power cord or discharge hose may occur. Use the handle supplied on the pump.

Installation and Operation

Always disconnect electric supply

before attempting

to install, service, relocate or perform any maintenance. If the power source is out of sight, lock and tag in open (off) position to prevent unexpected power application. Failure to do so could result in fatal electrical shock!

This unit is not

designed for use in septic tanks or underground vaults

to pump raw sewage or effluents. Never use in hazardous or explosive locations.

1.This pump has been designed with

1-1/4 NPT discharge size. Connect pipe or fitting to the discharge threads or connect the supplied garden hose elbow fitting to the pump. Thread the female end of the garden hose to the male discharge on the pump.

2.To reduce leakage between the pump and the hose, place a hose washer (not included) on the garden hose before installing to the pump.

REMINDER: Keep your dated proof of purchase for warranty purposes!

Attach it to this manual or file it for safekeeping.

© 2009 Wayne Water Systems

For parts, product & service information

352001-001 8/09

 

visit www.waynepumps.com

 

Page 1
Image 1
Wayne 352001-001 warranty Description, Unpacking, Safety Guidelines, General Safety Information, California Proposition