Operating Instructions and Parts Manual

TSC

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop- erty damage! Retain instructions for future reference.

Submersible Utility

Pump

Description

This portable, submersible utility pump is designed for non-automatic use in water. The units are equipped with an 8 ft. 3-prong grounding type power cord. The motor is oil filled and sealed for cooler operation. The discharge fit- ting is designed for convenient attach- ment to a garden hose.

IMPORTANT: THIS PUMP IS NOT SUITABLE FOR AQUATIC LIFE!

Unpacking

After unpacking the unit, carefully inspect for any damage that may have occurred during transit. Check for loose, missing or damaged parts.

Very Important Safety Information

Danger indicates an imminently haz-

ardous situation which, if not avoided, WILL result in death or serious injury.

Warning indicates a potentially haz- ardous situation which, if not avoided,

COULD result in death or serious injury.

Caution indicates a potentially haz-

ardous situation which, if not avoided, MAY result in minor or moderate injury.

Notice indicates important informa-

tion, that if not followed, MAY cause damage to equipment.

This manual contains information that is very important to know and under- stand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following:

1.Read these rules and instructions carefully. Failure to follow these instructions could cause

serious bodily injury and/or proper- ty damage.

Do not pump flammable or explosive fluids such as gaso-

line, fuel oil, kerosene, etc. Do not use in a flammable and/or explosive envi- ronment. Pump only clear water. Personal injury and/or property dam- age will result.

Risk of electric shock! This pump has not been tested for

use in swimming pool areas. Never place pump in pools while people are in the water.

Do not handle pump with wet hands or when standing in water or on a damp surface.

Risk of electric shock! This pump is supplied with a grounding conductor and grounding type attachment plug. Use a grounded receptacle to reduce the risk of fatal electrical shock.

This pump con- tains dielectric

motor oil for motor heat transfer. Care should be taken when disposing of this oil. Do not use this pump in ponds or fountains because the motor oil can be harmful to aquatic life.

2.Wear safety glasses at all times when working with pumps.

3.It is strongly recommended that this unit be plugged into a Ground Fault Circuit Interrupter (GFCI). Consult a local electrician for installation and availability.

4.Do not use the power cord or dis- charge hose to carry or handle the pump. Damage to the power cord or discharge hose may occur. Use the lifting ring supplied on the pump.

Installation and Operation

Always disconnect electric supply

before attempting to install, service, relocate or perform any maintenance. If the power source is out of sight, lock and TAG IN OPEN (OFF) POSITION to pre- vent unexpected power application. Failure to do so could result in fatal electrical shock!

This unit is not designed for use in septic tanks or under- ground vaults to pump raw sewage or effluents. Never use in hazardous or explosive locations.

1.This pump has been designed to attach to a standard garden hose. Thread the female end of the gar- den hose to the male discharge on the pump.

2.To reduce leakage between the pump and the hose, place a hose washer (not included) on the gar- den hose before installing to the pump.

3.For best pump performance, unwind the hose before starting the pump. This will help remove any kinks or binds in the hose and allow the unit to pump with less restriction.

4.Set the pump on a hard surface in the water. Do not set the pump directly on mud or sand surfaces. This will cause the inlet screen to clog.

5.The water level must be at least 1/2 inches for the pump to operate. Water levels less than 1/2 inches will not allow the impeller to contact water and no water will be pumped.

© 2000 Wayne Water Systems

351301-001 1/00

Page 1
Image 1
Wayne 351301-001, TSC manual Description, Unpacking, Installation and Operation

TSC, 351301-001 specifications

Wayne TSC, model 351301-001, is a state-of-the-art fuel dispenser designed to meet the demands of modern retail fueling operations. Known for its reliability and advanced technology, the Wayne TSC series combines user-friendly features with high-end performance, making it an ideal choice for gas stations looking to enhance their service offerings.

One of the primary features of the Wayne TSC, 351301-001 is its dual-hose capability, allowing for simultaneous dispensing of different fuel types. This is particularly beneficial for stations that provide both gasoline and diesel, as it enables quicker service and reduces the waiting time for customers.

Equipped with a robust and intuitive user interface, the Wayne TSC 351301-001 ensures that customers can easily navigate through the fueling process. The bright, backlit display provides clear visibility, even in low-light conditions, ensuring an enhanced user experience. Furthermore, the dispenser supports various payment options, including credit and debit cards, mobile payment solutions, and loyalty card integration, catering to the diverse preferences of customers.

In terms of technology, the Wayne TSC, 351301-001 incorporates advanced fuel management systems that enhance accuracy in fuel measurement and help in tracking sales in real-time. The unit is designed with advanced leak detection technology, ensuring compliance with environmental regulations and safeguarding against fuel loss. This feature not only protects the environment but also reduces operational costs for station owners.

Durability is another hallmark of the Wayne TSC series. Built with high-quality materials, the 351301-001 is resistant to harsh weather conditions, thereby prolonging its lifespan and minimizing maintenance needs. The dispenser's modular design simplifies repairs and upgrades, ensuring that service stations can continue to operate efficiently even in the face of wear and tear.

Additionally, the Wayne TSC, 351301-001 is energy-efficient, with low power consumption design elements that contribute to sustainability efforts within the fueling industry. This dispenser aligns with the growing trend of eco-conscious operations, making it an appealing choice for forward-thinking gas stations.

In summary, the Wayne TSC, model 351301-001 stands out in the competitive landscape of fuel dispensers. Its combination of user-friendly features, advanced technology, durability, and energy efficiency makes it a leading option for retailers looking to modernize their fueling operations while enhancing customer satisfaction.