Step 20
Complete accessory installation
You will need: work table, two accessory racks, warming rack, three tubing plugs and thermometer.
Set one accessory rack across the bottom braces in front of the frame connector. Figure 26 (a).
Set the second accessory rack across the bottom braces behind the frame connector. Figure 26 (b).
Open the lid and set the warming rack into the slots at the rear of the cooking box. Figure 26 (c).
Set the work table onto the left side rails. Figure 26 (d).
Insert the thermometer into its holder. Figure 26 (e).
Insert the tubing plugs into the ends of the frame. To fully seat the plugs, you may have to tap them lightly with a hammer. Figure 26 (f).
(e)
(d)
(c) |
|
(b) | (f) |
(a)
Figure 26
20
