Check:

a)Hose to manifold connection. Figure 18 (a).

b)Manifold to side burner hose connection.Figure 18 (b).

mWARNING: If there is a leak at connection (a), retighten the fitting with a wrench and recheck for leaks with soap and water solution.

If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE BARBECUE. Contact

Weber-Stephen Customer Service.

c)Side burner hose to side burner connection. Figure 18 (c).

d)Valves to manifold connections. Figure 18 (d).

e)Hose to quick disconnect connection. Figure 18 (e).

mWARNING: If there is a leak at connections

(b), (c), (d) or (e), turn OFF the gas. DO NOT OPERATE

THE BARBECUE. Contact Weber-Stephen Customer Service.

When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

(a)(b)

(c)

Step 16

Install Flavorizer Bars and Cooking Grates

You will need: five long Flavorizer Bars, eight short Flavorizer Bars and two cooking grates.

Set the long Flavorizer Bars side to side in the lower position, then set the short Flavorizer Bars front to back in the upper position in the cooking box. Figure 19.

Figure 19

The open "U" of the cooking grates goes down. Set the cooking grates onto the ledges in the cooking box. Figure 20.

Figure 20

(d)

Figure 18

(e)

17

Page 17
Image 17
Weber 3000 Series owner manual Install Flavorizer Bars and Cooking Grates