Tips occasionally yellowish
SIDE BURNER MAINTENANCE
mWARNING: All gas controls and supply valves should be in the OFF position. Figure 17 (a).
Make sure black wire is connected between igniter and electrode. Make sure white wire is connected between igniter and ground. Check that igniter lock nut is tight.
Figure 17 (b) and figure 17 (c).
Note - If the igniter works loose, carefully tighten the igniter lock nut with an adjustable wrench or pliers.
(a)
(b)
The Platinum Series II side burner has been factory set for the correct air and gas mixture. The correct flame pattern is shown in Figure 18.
Dark Light
blue blue
Figure 18
Igniter lock nut
Views from
figures 17 (b) and (c) from under side burner
Black wire
White wire
(c)
Figure 17
Ground
Electrode
16
