MAINTENANCE | 19 | |
| ||
5) Slide the burner assembly out from under the guide screw and |
| |
washer(1) in the corners of the cooking box. | (1) | |
6) Lift and twist the burner assembly slightly, to separate the crossover | ||
| ||
tube(1) from the burners. Remove the burners from the cooking box. |
| |
7) To reinstall the burners, reverse 3) through 7). |
| |
CAUTION: The burner openings(1) must be positioned |
| |
properly over the valve orifices(2). |
| |
Check proper assembly before fastening manifold in place. |
| |
WARNING: After reinstalling the gas lines, they should |
| |
be leak checked with a soap and water solution before |
| |
using the barbecue. (See Step: “Check for gas leaks.”) |
| |
| (1) | |
| (2) | |
(1) |
| |
CROSSOVER® IGNITION SYSTEM OPERATIONS |
| |
If the Crossover® ignition system fails to ignite the Left burner, light the Left | GENESIS A & B | |
burner with a match. If the Left burner lights with a match, then check the | ||
| ||
Crossover® ignition system. |
| |
• Check that both the white(1) and black(2) ignition wires are attached |
| |
properly. |
| |
• Check that the Crossover® ignition button pushes the igniter (button) |
| |
down, and returns to the up position. |
|
If the Crossover® ignition system still fails to light, contact the |
|
|
|
|
|
Customer Service Representative in your area using the | (1) |
|
|
| (2) |
|
| ||||
contact information on our web site. Log onto www.weber.com®. |
|
|
|
|
|
GENESIS C
(2)
(1)
