Weber 56216 manual Side Burner Maintenance, Annual Maintenance, Burner Flame Pattern

MAINTENANCE

SIDE BURNER MAINTENANCE

mWARNING: All gas controls and supply valves should be in

the OFF position.

Make sure black wire is connected between the igniter and electrode..

Make sure white wire is connected between the igniter and grounding clip..

Spark should be a white/blue color, not yellow..

A)Igniter wire (1)

B)Ground wire (2)

C)Burner (3) ◆

Side Burner Grate

Side Burner Cap

SideBurnerRing & Head

IgniterElectrode

Control Knob

Igniter

ANNUAL MAINTENANCE

Inspection And Cleaning Of The Spider/Insect Screens

To inspect the Spider/Insect screens, remove the control panel.. If there is dust or dirt on the screens, remove the burners for cleaning the screens..

Brush the Spider/Insect screens lightly with a soft bristle brush (i..e.. an old toothbrush)..

m CAUTION: Do not clean the Spider/Insect screens with hard or sharp tools. Do not dislodge the Spider/Insect screens or enlarge the screen openings.

Lightly tap the burner to get debris and dirt out of the burner tube.. Once the Spider/ Insect screens and burners are clean replace the burners..

If the Spider/Insect screen becomes damaged or cannot be cleaned, please contact the Customer Service Representative in your area using the contact information on our web site.. Log onto www..weber..com®..

Burner Flame Pattern 1

The Weber® gas barbecue burners have been factory set for the correct air and gas mixture.. The correct flame pattern is shown..

A)Burner tube (1)

B)Tips occasionally flicker yellow (2)

C)Light blue (3)

D)Dark blue (4)

If the flames do not appear to be uniform throughout the burner tube, follow the burner cleaning procedures.. ◆

3

2 1

1 2

2

3 4

www.weber.com® 25