Manuals / Weber / Outdoor Cooking / Gas Grill

Weber B069.A Side Burner does not light, Flame is low in High position, Flame is very yellow

Models: C075.A A103.A B069.A D082.A

1 36
Download 36 pages 46.01 Kb
Page 36
Image 36

Side Burner Troubleshooting

WARNING: Before attempting any troubleshooting steps, all gas controls and supply valves should be in the OFF position.

Problem

Check

Cure

Side Burner does not light.

Is gas supply off?

Turn supply on.

 

 

 

Flame is low in HIGH position.

Is the fuel hose bent or kinked?

Straighten hose.

 

 

 

Flame is very yellow in

Inspect the Weber Spider Stopper

Clean Weber Spider Stopper Guard.

conjunction with the smell of gas,

Guard for possible obstructions.

(See section “Annual Maintenance”)

 

(lockage of holes.)

 

OR

 

 

Burner makes popping noise in

 

 

conjunction with the smell of gas.

 

 

 

 

 

Push button ignition does not

Does burner light with a match?

If match lights burner, checkigniter

work.

 

(see below).

 

 

 

Side Burner maintenance

WARNING: All gas controls and supply valves should be in the OFF position.

Check igniter:

Make sure wire is connected between igniter and electrode. Check that igniter lock nut is tight.

Note: If the igniter works loose, carefully tighten the igniter lock nut with an adjustable wrench or pliers. Adjust igniter electrode to burner. Gap should be 1/8 to 3/16 inch from tip of electrode to burner. Spark should be a white/blue color, not yellow.

1)Igniter

2)Igniter Wire

3)Venturi/Burner

(1)

 

 

(2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4)1/8 to 3/16 inch gap between electrode and burner

(4)

(3)

D-10

Page 35
Page 36
Image 36
Weber B069.A, C075.A, D082.A, A103.A Side Burner does not light, Flame is low in High position, Flame is very yellow, Work
Page 35

C075.A, A103.A, B069.A, D082.A specifications

The Weber D082.A, B069.A, A103.A, and C075.A are part of Weber's distinguished range of high-performance electronic control devices, specifically designed for various industrial and commercial applications. Each model showcases distinctive features and cutting-edge technologies that enhance operational efficiency and reliability.

The Weber D082.A is renowned for its robust build, integrating advanced automation technology. It offers versatile programming options that allow users to customize operation modes based on specific applications. The D082.A supports multiple communication protocols, ensuring seamless integration with existing control systems. It is equipped with a high-resolution display for real-time monitoring and diagnostics, enabling users to make quick adjustments and enhance productivity. The protective design resists environmental challenges, making it suitable for harsh industrial settings.

Next, the B069.A model is designed with an emphasis on energy efficiency. It employs intelligent power management systems to reduce energy consumption while maintaining high output performance. This device is also equipped with advanced fault detection algorithms that quickly identify potential issues, minimizing downtime. Moreover, the B069.A features an intuitive user interface that simplifies configuration and operation, ensuring that even operators with limited technical knowledge can manage the system effectively.

The A103.A highlights its adaptability through modular design, allowing businesses to tailor the unit to their specific requirements by adding or removing components as needed. This flexibility is complemented by enhanced safety features, including emergency stop mechanisms and fail-safe operations, which ensure user protection in the event of system malfunctions. Additionally, the A103.A is designed for ease of maintenance, with quick-access panels that facilitate routine checks and service.

Finally, the C075.A model is characterized by its advanced analytics capabilities. With real-time data collection and analysis, this device enables users to optimize processes and predict maintenance needs. The C075.A incorporates state-of-the-art sensor technology, providing accurate monitoring of various parameters, including temperature, pressure, and flow rates. This information can be invaluable for industries that demand precision and compliance with regulatory standards.

In summary, the Weber D082.A, B069.A, A103.A, and C075.A collectively offer a range of advanced features and technologies aimed at improving industrial operations. Their unique characteristics cater to the diverse needs of modern enterprises, emphasizing efficiency, adaptability, and safety across various applications.