OPERATING INSTRUCTIONS
Lighting
WARNING: Open lid lid before lighting. Ash catcher must be in place when lighting and any time during use. If using a liquid fire starter, check the ash catcher for any accumulation of starter fluid before lighting charcoal. If fluid is present DO NOT LIGHT. Wipe out any fluid and replace ash catcher before lighting.
1)Open lid.
2)Clear bowl of ashes by moving the control rod side to side. Figure 1.
Control rod
Figure 1
3)Open bottom bowl vents. Figure 2.
ClosedOpen
Figure 2
4)Position
5)Light charcoal with Weber FireStarters or another commercially prepared fire starter.
Periodic Cleaning
CAUTION: Be sure barbecue is cool before cleaning.
To remove ashes from the bowl, move control rod side to side so damper blades sweep ashes through the vents. Figure 3.
Control rod
Figure 3
TO CLEAN KETTLE:
■While lid is warm, wipe the inside with a paper towel to prevent grease buildup.
■For outer surfaces, wash with a warm soapy water solution and rinse with clear water.
For a more thorough cleaning (to be done once a year):
1.Remove ashes.
2.Remove the grates and
3.Clean the porcelain finish with with a
4.Wipe out with paper towels. Wash with a mild detergent and water. Rinse well with clear water and wipe dry.
16