![](/images/new-backgrounds/1256390/25639033x1.webp)
Step 13
Install ash catcher, control panel & bottom rack
You will need: ash catcher, control panel and bottom rack.
Align handle and prongs of ash catcher with their appropriate slots on the ash catcher ring. The handle fits into the larger slot. Figure 15 (a).
Lift ash catcher up into slots and rotate to the right. Ash catcher will fit securely into place. Figure 15 (b).
Set control panel in place over igniter and LP tank handwheel. Figure 15.
Slide bottom rack into position between bottom connectors. Figure 15.
Control panel
Step 14
Add grates, Char-Basket Fuel Holders and lid
You will need: charcoal grate,
Place charcoal grate on bottom supports in bowl. Set
(a)(b)
Figure 16
Ash catcher handle
Figure 15
17