Weber S-460TM, S-660TM manual Connection Chart, Connect GAS Supply

GAS SUPPLY 29

CONNECT GAS SUPPLY

A 58 inch (147.32 cm) corrugated gas line is supplied with the grill. This line needs to pass through the gas inlet opening to the main gas supply.

1)Connect the corrugated gas line to the manifold located on the right hand side of grill under the control panel. Use the 1/2” flared gasket (1) to ensure proper seal.

®

Note: 1/2” flared gaskets are included in the Summit Built-In tank Enclosure Kit included with your grill.

The corrugated line passes through the “Island Structure” cavity to the hose and regulator

connection inside the tank enclosure. (Shown in illustration)

2)Uncap one flare fitting from the 90º Connection on the regulator hose located inside the tank enclosure.

3)Use the 1/2 (12.7 mm) inch flared gasket to ensure proper seal.

NOTE: Only use the 3/8 inch (9.53 mm) flared gasket if you are installing the optional side burner.

4) Connect the corrugated gas line to the 90º Connection.

CONNECTION CHART

ATop View

BTypical tank cabinet or tank enclosure location

CSide View

DTop of Box

EBack of Box

iCorrugated Gas Line to Manifold

ii90° fitting

iv1/2” (12.7 mm) Flared Gasket

vCap (Optional Side Burner)

	A
	B
	i	D
		ii
E	iv
		v
	C

WWW.WEBER.COM®