OPERATION

TO OPERATE MOWER (See Fig. 6)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the dis- charge guard in place.

"ENGAGED" POSITION

ATTACHMENT LIFT

LEVER HIGH POSITION

LOW

POSITION

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

DISCHARGE

GUARD

FIG. 6

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

• Choose the slowest speed before starting up or down hills.

• Avoid stopping or changing speed on hills.

• If slowing is necessary, move throttle control lever to slower position.

• If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

• Move gearshift lever to 1st gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

• To restart movement, slowly release parking brake and clutch/brake pedal.

• Make all turns slowly.

12

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL (See Fig. 11)

•The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

•Check engine oil with tractor on level ground.

•Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Customer Responsibilities section of this manual).

•To change engine oil, see the Customer Responsibilities section in this manual.

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW 32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

WARNING: Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

CAUTION: Fill to bottom of gas tank filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

Page 11 Page 13
Page 12
Image 12
Weed Eater 171883 Before Starting the Engine, To Operate on Hills, To Transport, Towing Carts and Other ATTACH- Ments
Page 11 Page 13

171883 specifications

The Weed Eater 171883 is a premier choice for homeowners and gardening enthusiasts seeking an efficient, reliable, and user-friendly string trimmer. This model is specifically designed to simplify yard maintenance, making it an essential tool for tackling overgrown grasses, weeds, and even light brush.

One of the standout features of the Weed Eater 171883 is its lightweight design. Weighing in at a manageable level, this trimmer is easy to handle, allowing users to maneuver effortlessly around garden beds, fences, and other obstacles. The balanced weight distribution means less fatigue during extended use, making it a practical option for larger yards.

The 171883 model incorporates a powerful motor that delivers high performance, ensuring effective cutting power. With its notable RPM (revolutions per minute), users can expect fast and efficient trimming, significantly reducing the time spent on yard work. This makes it an ideal solution for busy homeowners who require a quick yet effective gardening tool.

Another key feature is the innovative line feed technology. This model utilizes a bump feed system, which allows the user to release more cutting line simply by tapping the trimmer head on the ground. This easy-to-use mechanism ensures that you always have the optimal length of line for the job without the need for manual adjustments, allowing for a more efficient workflow.

The Weed Eater 171883 also boasts adjustable handle positions, providing customizable comfort and control. Users can easily modify the height of the handle for a more ergonomic grip, reducing strain on the wrists and back during prolonged use.

Finally, the trimmer is equipped with a durable and robust cutting head that can withstand the rigors of outdoor use. Its reinforced construction means it can handle tough vegetation with ease while offering quick and straightforward line changes.

In summary, the Weed Eater 171883 combines lightweight design, powerful performance, user-friendly features, and durability. It is an essential tool for anyone looking to maintain their yard efficiently and effectively, making outdoor chores less of a burden and more of an enjoyable experience. With this trimmer, keeping your lawn looking pristine has never been easier.
Top Page Image Contents