ASSEMBLY

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment bolt.

•Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

•Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

•Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

•Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

•Pivot seat and pan forward and assemble adjustment bolt, lockwasher and flat washer loosely. Do not tighten

•Lower seat into operating position and sit on seat.

•Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

•Get off seat without moving its adjusted position.

•Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

LOCK WASHER

ADJUSTMENT

BOLT

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Operation section, page 10, for location and function of controls)

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Release parking brake by depressing clutch/brake pedal.

•Place freewheel control in freewheeling position to disengage transmission (See “TO TRANSPORT” in the Operation section of this manual).

•Roll tractor forward off skid.

•Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Opera- tion section, page 10, for location and func- tion of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

•Be sure all the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Place freewheel control in "transmission engaged" po- sition.

•Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

•Place motion control lever in neutral (N) position.

•Press lift lever plunger and raise attachment lift lever to its highest position.

•Start the engine. After engine has started, move throttle control to idle position.

•Release parking brake.

•Slowly move the motion control lever forward and slowly drive tractor off skid.

•Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

•Turn ignition key to "OFF" position.

Continue with the instructions that follow.

7

Page 6 Page 8
Page 7
Image 7
Weed Eater 177019 manual Install Seat See Fig, Lower seat into operating position and sit on seat
Page 6 Page 8

177019 specifications

The Weed Eater 177019 is a powerful and versatile string trimmer designed for homeowners and landscape enthusiasts alike. With its ease of use and efficient performance, it has become a popular choice for those looking to maintain neat and tidy lawns, gardens, and outdoor spaces.

One of the standout features of the Weed Eater 177019 is its 17-inch cutting width. This wide cutting path allows users to tackle larger areas in less time, making it ideal for properties of varying sizes. The trimmer is equipped with a reliable and robust 25cc 2-cycle engine, providing enough power to handle tough weeds and overgrown grass. The lightweight design, weighing only 10.3 pounds, offers excellent maneuverability, reducing arm fatigue during extended use.

The Weed Eater 177019 features an adjustable telescoping shaft, allowing users to customize the length according to their height and comfort. This ergonomic design enhances user experience, making it suitable for people of all sizes. The soft-grip handle provides additional comfort and control, enabling users to maintain precision while trimming around flower beds and garden borders.

Another impressive characteristic of this trimmer is its automatic line advancement system. This technology ensures that the trimmer line is advanced smoothly and easily, eliminating the hassle of manual adjustments. Users simply tap the head of the trimmer on the ground while in use to release more line, allowing for continuous cutting without interruptions.

The Weed Eater 177019 also incorporates a dual-line system that effectively increases cutting efficiency. This feature allows for a cleaner and more accurate cut, reducing the risk of damaging surrounding plants and structures. The easy-loading spool further simplifies maintenance, enabling users to quickly replace the trimmer line without hassle.

For added convenience, the Weed Eater 177019 is designed for easy starting. Its spring-assisted starter reduces pull resistance, making it simpler for users to get the trimmer up and running. This user-friendly design is a significant advantage, especially for those who may be less experienced with power tools.

In summary, the Weed Eater 177019 is an efficient string trimmer packed with features that promote ease of use and effective lawn care. With its powerful engine, adjustable design, automatic line advancement, and user-friendly operation, it proves to be a reliable choice for anyone looking to keep their outdoor spaces well-groomed. Its combination of performance and comfort makes it a valuable addition to any homeowner's tool collection.
Top Page Image Contents