To prepare your router for installation:
1.Carefully peel off the protective film covering both sides of your router (see Figure 1).
Figure 1
2.Set up your wireless router by inserting the tabs of the stand (supplied with your router) into the slots on the bottom of your router as shown in Figure 2. Then, remove the protective film covering the status light panel of the router.
Figure 2
3.Place your router in a suitable area for installation (near an AC power outlet and accessible to the Ethernet cables for your wired computers).
To ensure proper heat dissipation and for router stability, it is important that you connect the stand and place your router in an upright position.
Getting to Know Your Wireless Router | 2 |
