8.Review that your network is now set up (as shown in Figure 10); you are ready to start your network.

Internet

8+.

Figure 10

9.Start your network in the correct sequence, as described below.

Failure to start or restart your network in the correct sequence could prevent you from accessing the Internet.

To start your network:

1.Plug in and turn on the cable or DSL modem. Wait 2 minutes.

2.Plug the end of the power adapter’s cord into the wall or a power strip, and into the power adapter outlet of your wireless router (F). Wait 1 minute.

Manually Installing Your Router

15

Page 19
Image 19
NETGEAR WNR2000V3 manual To start your network