Weed Eater 530087893 manual Assembly, Blower Tube, Operating Position, Operating Tips

Models: 530087893

1 6
Download 6 pages 12.5 Kb
Page 3
Image 3
ASSEMBLY

DEmpty the fuel tank before storing the unit. Use up fuel left in carburetor by starting the

engine and letting it run until it stops.

D Do not use any accessory or attachment other than those recommended by the manufacturer for use with your unit.

DDo not store the unit or fuel in a closed area where fuel vapors can reach sparks or an open flame from hot water heaters, electric

motors or switches, furnaces, etc.

DStore in a dry area out of reach of children. SPECIAL NOTICE: For users on U.S. For- est Land and in some states, including Cali- fornia(Public Resources Codes 4442 and 4443), Idaho, Maine, Minnesota, New Jersey, Oregon, and Washington: Certain internal combustion engines operated on forest, brush, and/or grass covered land in the above areas are required to be equipped with a spark arrestor, maintained in effective work- ing order, or the engine must be constructed, equipped, and maintained for the prevention of fire. Check with your state or local authori- ties for regulations pertaining to these re- quirements. Failure to follow these require- ments is a violation of the law. This unit is not factory equipped with a spark arrestor; how- ever, a spark arrestor is available as an op- tional part. If a spark arrestor is required in your area, contact an Authorized Service Dealer for the correct kit. The spark arrestor, blower tubes, and nozzles must be as- sembled to unit to be in full compliance with regulations.

SPECIAL NOTICE: Exposure to vibra- tions through prolonged use of gasoline pow- ered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to circulation disorders or abnormal swelling. Prolonged use in cold weather has been linked to blood vessel dam- age in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture, or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti- vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condi- tion of this tool.

NOTE: It is normal for the fuel filter to rattle in the empty fuel tank.

ASSEMBLY

BLOWER TUBE WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

DNo tools are required for assembly.

BLOWER TUBE

DPush the blower tube into the blower outlet until it snaps into place.

Blower Outlet

Blower Tube

You MUST make sure the tube is secure be- fore using the unit.

OPERATING

POSITION

Eye

Protection

OPERATING TIPS

SOperate power equipment only at reasonable hours--not early in the morning or late at night when people might be disturbed. Comply with times listed in local ordinances. Usual recom-

mendations are 9:00 a.m. to 5:00 p.m., Monday though Saturday.

STo reduce noise levels, limit the number of pieces of equipment used at any one time.

SUse rakes and brooms to loosen debris be- fore blowing.

S In dusty conditions, slightly dampen sur- faces when water is available.

S Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches, and gardens.

SWatch out for children, pets, open windows, or freshly washed cars. Blow debris away

safely.

SUse the full blower nozzle extension so the air stream can work close to the ground.

S After using blowers and other equipment, CLEAN UP! Dispose of debris in trash re- ceptacles.

-- 3 --

Page 3
Image 3
Weed Eater 530087893 manual Assembly, Blower Tube, Operating Position, Operating Tips