OPERATION

KNOW YOUR HEDGE TRIMMER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the vari- ous controls and adjustments. Save this manual for future reference.

Muffler

ON/OFF

 

 

 

 

 

 

Spark Plug

 

Switch

 

 

 

 

Throttle Lock

 

 

 

Hand Guard

 

 

Throttle

 

 

 

Lock--out

 

 

 

Throttle

Primer Bulb

Trigger

Fuel Mix Fill Cap

 

 

Choke Lever

 

 

 

 

ON/OFF SWITCH

PRIMER BULB

 

 

The ON/OFF SWITCH is used to stop the en-

The PRIMER BULB removes air from the car-

gine. To stop engine, move switch to OFF.

buretor and fuel lines and fills them with fuel.

 

This allows you to start the engine with fewer

 

pulls on the starter rope. Activate the primer

CHOKE

bulb by pressing it and allowing it to return to

its original position.

 

 

The CHOKE helps to supply fuel to the engine

 

 

THROTTLE TRIGGER

to aid in cold starting. Activate the choke by

moving choke lever to the desired position. See

The THROTTLE TRIGGER controls engine

STARTING YOUR ENGINE for complete start-

speed. Squeeze the trigger for full speed opera-

ing information.

tion; release it for idle speed.

 

 

 

 

WARNING: Muffler is very hot during

IMPORTANT

 

 

Experience indicates that alcohol blended fuels

and after use. Do not touch the muffler or al-

(called gasohol or using ethanol or methanol)

low combustible material such as dry grass or

can attract moisture which leads to separation

fuel to do so.

and formation of acids during storage. Acidic

BEFORE STARTING ENGINE

gas can damage the fuel system of an engine

WARNING: Be sure to read the fuel

while in storage. To avoid engine problems,

empty the fuel system before storage for 30

information in the safety rules before you be-

days or longer. Drain the gas tank, start the en-

gin. If you do not understand the safety rules,

gine and let it run until the fuel lines and carbure-

do not attempt to fuel your unit. Call

tor are empty. Use fresh fuel next season.

1-800-554-6723.

Never use engine or carburetor cleaner prod-

FUELING ENGINE

ucts in the fuel tank or permanent damage

WARNING: Remove fuel cap slowly

may occur.

 

 

OPERATING INSTRUCTIONS

when refueling.

It is recommended that the engine not be

This engine is certified to operate on un-

operated for longer than 30 seconds at full

leaded gasoline. Before operation, gasoline

throttle. Releasing the trigger and allowing

must be mixed with a good quality synthetic

the engine to briefly return to idle speed (5 --

2-cycle air-cooled engine oil designed to be

10 seconds) will be sufficient.

mixed at a ratio of 40:1. Poulan/Weed Eater

brand synthetic oil is recommended. A 40:1

IMPORTANT POINTS

ratio is obtained by mixing 3.2 ounces (95 ml)

S Use the minimum throttle speed necessary

of oil with 1 gallon (4 liters) of unleaded gaso-

 

to effectively cut hedges for optimal hedge

line). DO NOT USE automotive oil or boat oil.

 

trimmer performance.

These oils will cause engine damage. When

S Never attempt to use this hedge trimmer to

mixing fuel, follow instructions printed on oil

 

cut hedges that have any branches with a

container. Once oil is added to gasoline,

diameter larger than 7/16.

shake container momentarily to assure that

 

the fuel is thoroughly mixed. Always read and

 

follow the safety rules listed under HANDLE

 

FUEL WITH CAUTION.

 

-- 4 --

Page 4
Image 4
Weed Eater 530164003 instruction manual Operation

530164003 specifications

The Weed Eater 530164003 is a versatile and reliable tool designed for homeowners and landscaping professionals alike, ideal for tackling overgrown lawns and gardens with ease. This product stands out due to its combination of power, lightweight design, and advanced technology, making it a popular choice in the market.

One of the main features of the Weed Eater 530164003 is its powerful engine. The unit is equipped with a robust 25cc two-stroke engine that delivers exceptional cutting performance. This level of power allows users to tackle tough weeds, grass, and brush without bogging down, ensuring a clean and efficient cut every time. The engine is designed for easy starting, which reduces frustration and lets you get to work quickly.

The design of the Weed Eater 530164003 also emphasizes user comfort and control. With its lightweight construction, weighing around 11 pounds, it minimizes fatigue during prolonged use. The ergonomic handle and shoulder strap enhance maneuverability, allowing users to navigate tight spaces and uneven terrain with ease. Additionally, the controls are conveniently placed, giving users direct access to throttle and trigger functions.

Another noteworthy feature is the innovative cutting technology. The Weed Eater 530164003 comes with a dual-line trimmer head that automatically feeds a heavy-duty cutting line as it wears down. This ensures consistent cutting performance and eliminates the need for manual line adjustments, saving users valuable time. The trimmer head is also compatible with various attachments, promoting versatility for different lawn care tasks, from edging to brush cutting.

Furthermore, the Weed Eater 530164003 is built with durability in mind. The materials used in its construction can withstand the rigors of frequent use, ensuring longevity and reliability in performance. The air filter system is designed for easy access and maintenance, promoting efficient airflow to the engine while protecting it from debris.

In conclusion, the Weed Eater 530164003 is a powerful, lightweight, and user-friendly trimmer that incorporates advanced features and technologies. Its dependable engine, comfortable design, and innovative cutting systems make it an excellent choice for anyone looking to maintain their outdoor spaces effectively. Whether for residential lawns or professional landscaping, this tool is a valuable asset in any garden care toolkit.