OPERATING POSITION

Hearing

Protection Eye

Protection

STOPPING YOUR ENGINE

D To stop the engine, move the ON/OFF switch to the OFF position.

STARTING YOUR ENGINE

DFuel engine. Move at least 10 feet (3 me- ters) away from the fueling site.

DHold the unit on the ground in the starting position as shown. Support unit so the blade is off of the ground and away from trees, bushes, onlookers, etc.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Throttle Lock

Throttle

Lock-out

Throttle

Trigger

3.Slowly press the primer bulb 6 times.

4.Move the choke lever to the FULL CHOKE position.

Primer Bulb

Choke

 

 

Lever

5.Pull starter rope handle sharply until en- gine sounds as if it is trying to run, but do not pull rope more than 6 times.

6.Move the choke lever to the HALF CHOKE position.

7.Pull starter rope sharply until the engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), check to make sure the ON/OFF switch is in the ON position. Move the choke lever to the FULL CHOKE position and press the primer bulb 6 times; pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter rope until the en- gine runs, but no more than 6 more pulls. If the engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

8.Once the engine starts, allow the engine to run 10 seconds, then move the choke lever to the OFF CHOKE position. Allow the unit to run for 30 more seconds at the OFF CHOKE position before squeezing and releasing the throttle trigger to release the throttle lock.

NOTE: If engine dies with the choke lever in the OFF CHOKE position, move the choke le- ver to the HALF CHOKE position and pull the rope until the engine runs, but no more than 6 pulls.

1.Move the ON/OFF switch to the ON posi- tion.

2.Engage the throttle lock as follows: D press the throttle lock--out;

D squeeze and hold throttle trigger; D press and hold throttle lock, then D release the throttle trigger

NOTE: Keep the throttle lock engaged until the engine starts.

ON OFF

Switch

STARTING A WARM ENGINE

1.Move the ON/OFF switch to the ON posi- tion.

2.Slowly press the primer bulb 6 times.

3.Move the choke lever to the HALF CHOKE position.

4.Engage the throttle lock as directed in

STARTING A COLD ENGINE.

NOTE: Keep the throttle lock engaged until the engine starts.

5.Pull starter rope sharply until engine runs, but no more than 5 pulls.

6.Allow the engine to run 10 seconds, then move the choke lever to the OFF CHOKE position.

7.Release the throttle lock by squeezing and releasing the trigger.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

-- 5 --

Page 4 Page 6
Page 5
Image 5
Weed Eater 530164003 Operating Position, Stopping Your Engine, Starting Your Engine, Starting a Warm Engine
Page 4 Page 6

530164003 specifications

The Weed Eater 530164003 is a versatile and reliable tool designed for homeowners and landscaping professionals alike, ideal for tackling overgrown lawns and gardens with ease. This product stands out due to its combination of power, lightweight design, and advanced technology, making it a popular choice in the market.

One of the main features of the Weed Eater 530164003 is its powerful engine. The unit is equipped with a robust 25cc two-stroke engine that delivers exceptional cutting performance. This level of power allows users to tackle tough weeds, grass, and brush without bogging down, ensuring a clean and efficient cut every time. The engine is designed for easy starting, which reduces frustration and lets you get to work quickly.

The design of the Weed Eater 530164003 also emphasizes user comfort and control. With its lightweight construction, weighing around 11 pounds, it minimizes fatigue during prolonged use. The ergonomic handle and shoulder strap enhance maneuverability, allowing users to navigate tight spaces and uneven terrain with ease. Additionally, the controls are conveniently placed, giving users direct access to throttle and trigger functions.

Another noteworthy feature is the innovative cutting technology. The Weed Eater 530164003 comes with a dual-line trimmer head that automatically feeds a heavy-duty cutting line as it wears down. This ensures consistent cutting performance and eliminates the need for manual line adjustments, saving users valuable time. The trimmer head is also compatible with various attachments, promoting versatility for different lawn care tasks, from edging to brush cutting.

Furthermore, the Weed Eater 530164003 is built with durability in mind. The materials used in its construction can withstand the rigors of frequent use, ensuring longevity and reliability in performance. The air filter system is designed for easy access and maintenance, promoting efficient airflow to the engine while protecting it from debris.

In conclusion, the Weed Eater 530164003 is a powerful, lightweight, and user-friendly trimmer that incorporates advanced features and technologies. Its dependable engine, comfortable design, and innovative cutting systems make it an excellent choice for anyone looking to maintain their outdoor spaces effectively. Whether for residential lawns or professional landscaping, this tool is a valuable asset in any garden care toolkit.
Top Page Image Contents