DHave all maintenance other than the rec- ommended procedures described in the instruction manual performed by an au- thorized service dealer.
DAlways see an authorized service dealer to replace a damaged impeller. Parts that are chipped, cracked, broken, or dam- aged in any other way can fly apart and cause serious injury. Replace damaged
parts before using the unit.
D Never place any object in the air intake opening as this could restrict proper air flow and cause damage to the unit.
DNever douse the unit with water or other liquids or squirt with a water hose. Clean the unit using a damp cloth. Wipe off with
a clean dry cloth. See MAINTENANCE.
DCheck air intake openings and tubes fre- quently, always with the unit stopped and power source disconnected. Keep vents and tubes free from debris which can ac-
cumulate and restrict proper air flow.
D Do not burn, incinerate, or expose this unit to extreme heat.
DStore the unit unplugged in a high, cool, dry, indoor area out of the reach of chil-
dren.
D Use only recommended attachments and replacement parts to avoid creating a hazard and/or voiding your warranty.
D Maintain the unit according to recom- mended procedures.
BLOWER SAFETY
D Use only in daylight or in good artificial light.
D Inspect the area before using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can rico- chet, be thrown, or otherwise cause injury or damage during operation.
D Never run the unit without the proper equipment attached. When used as a blower, always install a blower tube. Use only recommended attachments.
DTo avoid spreading fire, do not use blower near leaf or brush fires, fireplaces, barbe-
cue pits, ashtrays, etc.
D Never place objects inside the blower tubes; always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to rico- chet which can hurt people or animals, break glass, or cause other damage.
DNever use for spreading chemicals, fertil- izers, or any other substances which may contain toxic materials.
VACUUM SAFETY (If applicable)
DStop the motor and disconnect the power source before opening the air inlet door or attempting to insert or remove the vacu- um tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating
blades.
DHard objects can be thrown through the
collection bag or the housing and be- come dangerous missiles which can cause serious injury to operator or others.
DWhen using the vacuum attachment, the unit is designed to pick up dry material such as leaves, grass, small twigs, and bits of paper. Do not vacuum stones, gravel, metal, broken glass, etc., to avoid severe damage to the impeller. To avoid
the possibility of electrical shock, do not attempt to vacuum water or other liquids.
D Never run the unit without the proper equipment attached. When used as a vacuum, always install vacuum tubes and collection bag assembly. Make sure the collection bag assembly is completely zipped when unit is running to avoid flying debris. Use only recommended attach- ments.
DAvoid situations which could set the col- lection bag on fire. Do not vacuum dis- carded matches, cigars, cigarettes, or ash from fireplaces, barbecue pits, brush piles, etc. To avoid spreading fire, do not use blower near leaf or brush fires, fire-
places, barbecue pits, ashtrays, etc.
DAlways use collection bag shoulder strap when vacuuming to avoid loss of control.
D Check air intake openings, elbow tube, and vacuum tubes frequently, always with the unit stopped and the power source disconnected. Keep vents and tubes free of debris which can accumu- late and restrict proper air flow. Do not use with any opening blocked. Keep free of dust, lint, hair and anything that may re- duce air flow.
STANDARDS
This product is listed by Underwriter’s Lab- oratories, Inc., in accordance with UL Stan- dard 1017.
If situations occur which are not covered in this manual, use care and good judgement. If you need assistance, contact your autho- rized service dealer or call
SAVE THESE INSTRUCTIONS
4
